Xiaomi Redmi Note 8 Pro Stock Firmware

Flashing Tools            Wallpapers
USB Drivers

Xiaomi Redmi Note 8 Pro Stock Firmware

This post includes the official flash file for Xiaomi Redmi Note 8 Pro Stock Firmware which you can download it for free {Xiaomi Redmi Note 8 Pro Stock Flash File Update}. The installation guide for flashing is also included Please do follow the instruction of installation for the best result. At first you have to install and setup the flashing tool and USB Driver that is already provided for you, then you can safely flash your android Smartphone. Make sure you do not use this firmware for any other device, the possible consequence can be bad for that. Also make sure you take a backup of your phone before installing the firmware for a safe side. Thanks for Visiting TechnicalinfoHUB.

Installation Guidance (How To Install)

Step 1: Turn off your Smartphone and try to remove the battery if it is removable.

Step 2: Download the USB Driver from the link given at the beginning of the post and install it on your laptop, make sure you download the correct USB Driver for your android device. If you already have the USB Driver installed in your laptop, skip this step.

Step 3: Download the Stock Rom or Custom Rom that you want to Flash on to your Smart Phone. Make sure to extract the Stock Rom on to your laptop.

Step 4: Also download and extract the Flash Tool on to your laptop. Make sure you download the correct flash tool corresponding to your android device. After extracting you will see some files.

Step 5: Now you have to open the file named “Flash_tool”.

Step 6: Once the flash tool is launched click on the “Download” button, you can locate it in at the top of the flashing tool.

Step 7: In the Download tab, now click on the scatter-loading button, located on the right side of the download tab.

Step 8: After clicking on the Scatter-loading button, you have to locate and select the scatter files. You can find the files in the Stock Rom folder that you have downloaded.

Step 9: Now you can click on the Download button to start the flashing process for your android device.

Step 10: Now, Connect your Smartphone to your laptop using a USB Cable (Try removing the battery, if it is removable). Then you have to press the volume up and down button of your Smartphone so that your laptop easily detect the Smartphone.

Step 11: A green light will appear indicating that the flashing process is completed.

Step 12: Now you can close the flash tool and disconnect your Smartphone from the laptop and restart your Smartphone.

  • Make sure your Smartphone has at least 40-50 percent battery charge in order to perform the flashing process successfully.

Note: All the files you download from the site and use it at your own risk and are fully responsible for it.

Xiaomi Redmi Note 8 Pro Stock Firmware

Link For The Flash File:Click Here To Download
File Size: 1.8 GB

Xiaomi Redmi Note 8 Pro Stock Firmware

Xiaomi Redmi Note 8 Pro (2019) Key Specification
Xiaomi Redmi Note 8 Pro (2019) Key Specification

About Xiaomi Redmi Note 8

Redmi Note 8 Pro is powered by an octa-core MediaTek Helio G90T processor. It comes with 6GB of RAM. The Redmi Note 8 Pro runs Android 9 Pie and is powered by a 4,500mAh non-removable battery. The Redmi Note 8 Pro supports proprietary fast charging. As far as the cameras are concerned, the Redmi Note 8 Pro on the rear packs a 64-megapixel primary camera; a second 8-megapixel camera; a third 2-megapixel camera and a fourth 2-megapixel camera. The rear camera setup has autofocus. It sports a 20-megapixel camera on the front for selfies. The Redmi Note 8 Pro runs MIUI 10 based on Android 9 Pie and packs 64GB of inbuilt storage. The Redmi Note 8 Pro is a dual-SIM smartphone that accepts Nano-SIM and Nano-SIM cards.

About Xiaomi

Xiaomi was founded in 2010, are based in Beijing, Mainland China. Xiaomi released its first smartphone in August 2011 and rapidly gained market share in China to become the country’s largest smartphone company in 2014. Xiaomi has 15,000 employees in China, India, Malaysia Singapore. Xiaomi was founded in April 2010 by ex-Kingsoft CEO Lei Jun, as a software company creating a new custom ROM based on Google’s Android. Their aim was to provide additional functionality that Android had yet to offer and an easy to use user interface. MIUI, the ROM which the team created, became a huge success and has been ported to many devices.

As of 2014 MIUI can be downloaded and installed to over 200 devices in both English and Chinese, even non-developers can easily install MIUI to their phones using the MIUI Express APK. As of the end of 2013, Xiaomi had over 30 million MIUI users worldwide! Very impressive for such a young company! The MIUI ROM was likened to Apple’s iOS for being very easy to use whilst providing sophisticated services such as cloud backup, an easy to use music player and their own app store. The team at Xiaomi have always wanted users to feel part of the company and happily take on fan feedback via multiple channels and update the ROM every Friday with bug fixes, optimization, and additional features. Too good to be true? Well, try it out for yourself as it’s probably available for your device already.

Also Check Xiaomi Redmi Note 8 Pro (2019) Key Specification

Leave a Reply

Your email address will not be published. Required fields are marked *