TECNO Pop 1s Official Stock Firmware

Flashing Tools            Wallpapers
USB Drivers

TECNO Pop 1s Official Stock Firmware

This post includes the official flash file for TECNO Pop 1s which you can download it for free {TECNO Pop 1s Official Stock Flash File Update}. The installation guide for flashing is also included Please do follow the instruction of installation for the best result. At first you have to install and setup the flashing tool and USB Driver that is already provided for you, then you can safely flash your android Smartphone. Make sure you do not use this firmware for any other device, the possible consequence can be bad for that. Also make sure you take a backup of your phone before installing the firmware for a safe side. Thanks for Visiting TechnicalinfoHUB.

Installation Guidance (How To Install)

Step 1: Turn off your Smartphone and try to remove the battery if it is removable.

Step 2: Download the USB Driver from the link given at the beginning of the post and install it on your laptop, make sure you download the correct USB Driver for your android device. If you already have the USB Driver installed in your laptop, skip this step.

Step 3: Download the Stock Rom or Custom Rom that you want to Flash on to your Smart Phone. Make sure to extract the Stock Rom on to your laptop.

Step 4: Also download and extract the Flash Tool on to your laptop. Make sure you download the correct flash tool corresponding to your android device. After extracting you will see some files.

Step 5: Now you have to open the file named “Flash_tool”.

Step 6: Once the flash tool is launched click on the “Download” button, you can locate it in at the top of the flashing tool.

Step 7: In the Download tab, now click on the scatter-loading button, located on the right side of the download tab.

Step 8: After clicking on the Scatter-loading button, you have to locate and select the scatter files. You can find the files in the Stock Rom folder that you have downloaded.

Step 9: Now you can click on the Download button to start the flashing process for your android device.

Step 10: Now, Connect your Smartphone to your laptop using a USB Cable (Try removing the battery, if it is removable). Then you have to press the volume up and down button of your Smartphone so that your laptop easily detect the Smartphone.

Step 11: A green light will appear indicating that the flashing process is completed.

Step 12: Now you can close the flash tool and disconnect your Smartphone from the laptop and restart your Smartphone.

  • Make sure your Smartphone has at least 40-50 percent battery charge in order to perform the flashing process successfully.

Note: All the files you download from the site and use it at your own risk and are fully responsible for it.

TECNO Pop 1s Official Stock Firmware

Link For The Flash File: Click Here To Download
File Size: 730 MB

TECNO Pop 1s Official Stock Firmware

TECNO Pop 1s (2018) Key Specification
TECNO Pop 1s (2018) Key Specification

About Tecno Pop 1s

The Tecno Pop 1S boasts of a Quad (Four) Core processor clocked at 1.25 GHz, the chipset is the MediaTek MT6580. The GPU is the Mali 400 MP2. The Tecno Pop 1S comes with dual SIM slots and supports the 2G, 3G and 4G LTE Band for its connectivity. It has inbuilt with its Wi-Fi capability and the ability to create Wireless Hotspots. The Tecno Pop 1S has a battery with the capacity of 3000 mAh. The Battery uses the Li-Po technology and it is non-removable. This battery could last for a day on average heavy usage. The Tecno Pop 1S comes with a 5.5-inch display and boasts of a 1.28 GHz Quad-core Cortex A53  processor with Android 8.1, Oreo (GO Edition). It also comes with a 1 GB of RAM, an internal memory of 16 GB. It has a back/ rear camera of 8 MP and a 5 MP front camera with a 3000 mah Li-Po battery capacity to push all this.

About Tecno

TECNO announced its multi-year partnership with Manchester City Football Club on November 2016. As the Official Global Tablet and Handset Partner of Manchester City Football Club, TECNO Mobile will work with the Club to grow its strategic marketing and advertising campaigns across the globe, and to connect with fans and customers to provide them with the unparalleled mobile experience. In 2006, Tecno Mobile was founded as Tecno Telecom Limited but later changed its name to Transsion Holdings with Tecno Mobile serving as one of its subsidiaries. In 2007 Tecno created a second brand, iTel that sold in Africa and in May 2017 was recognized as the “most student-friendly brand. Early 2008, Tecno shifted its market target entirely to Africa following market research. In 2010, it ascended into the top three mobile phone brands in Africa. In 2012, Tecno released the first “Made in Ethiopia” smartphone. Tecno announced in 2016 their first mobile phone to run on Marshmallow. In 2016, Tecno Mobile launched “The Best Camera Smartphone In Africa” In the same year, Tecno launched the Tecno Phantom 6 and Tecno Phantom 6 Plus with a Biometric authentications security followed by the Phantom 8 that was unveiled at an event in Dubai In 2017, Tecno Mobile launched its first Dual front led flash device, the phone is dubbed Tecno Camon CX.

Also Check TECNO Pop 1s Key Specification

Leave a Reply

Your email address will not be published. Required fields are marked *