Meizu V8 Pro (2018) Official Firmware Download

Flashing Tools
USB Drivers

Meizu V8 Pro (2018) Official Firmware Download

This post includes the official flash file for Meizu V8 Pro (2018) which you can download it for free {Meizu V8 Pro (2018) Official Firmware Download}. The installation guide is also included Please do follow the instruction of installation for the best result. Make sure you do not use this firmware for any other device, the possible consequence can be bad for that. Also make sure you take a backup of your phone before installing the firmware for a safe side. Thanks for Visiting TechnicalinfoHUB.

Installation Guidance (How To Install)

Step 1: Download and install the Android USB Driver on your computer. In case Android USB Drivers are already installed on your Computer then skip this step.

Step 2: Power Off your Android Smartphone and remove the Battery (if it is removable).

Step 3: Download the Stock Rom or Custom Rom that you want to Flash on your Android Smartphone and extract it on your Computer.

Step 4: Download and Extract Smart Phone Flash Tool on Your Computer. After Extracting you will be able to see Some Files

Step 5: Now Open Flash_tool.exe.

Step 6: Once the Smart Phone Flash Tool is launched, Click on the Download Tab.

Step 7: In the Download Tab, now click on the scatter-loading button.

Step 8: Now, Locate the Scatter File (you will find the scatter file in the Stock ROM folder).

Step 9: Now, Click on the Download Button to begin the Flashing Process.

Step 10: Now, Connect your Smartphone to the Computer using USB Cable (without battery- if it is removable). After connecting the device to the computer Press Volume Down or Volume Up key, so that your computer easily detects your smartphone.

Step 11: Once Flashing is completed, a Green Ring will appear.

Step 12: Close the Smart Phone Flash Tool on your computer and disconnect your Android Smartphone from the computer.

Note: All the files you download from the site and use it at your own risk and are fully responsible for it.

Meizu V8 Pro (2018) Official Firmware Download

Link For The Flash File: Coming Soon
File Size:  
Model:  

Meizu V8 Pro (2018) Official Firmware Download

Meizu V8 Pro (2018) | Key Specification
Meizu V8 Pro (2018) Official Firmware Download

About Meizu V8 Pro

Meizu V8 Pro smartphone was launched in September 2018. The phone comes with a 5.70-inch touchscreen display with a resolution of 720×1440 pixels at a pixel density of 282 pixels per inch (ppi) and an aspect ratio of 18:9. Meizu V8 Pro comes with 4GB of RAM. The Meizu V8 Pro runs Android and is powered by a 3,100mAh battery. As far as the cameras are concerned, the Meizu V8 Pro on the rear packs a 12-megapixel primary camera with an f/2.2 aperture and a second 5-megapixel camera with an f/2.2 aperture. It sports a 5-megapixel camera on the front for selfies, with an f/1.9 aperture. Meizu V8 Pro based on Android and packs 64GB of inbuilt storage that can be expanded via microSD card (up to 128GB).

About Meizu

Jack Wong established Meizu in 2003. Initially a manufacturer of MP3 players, Meizu released their first MP4 player in 2006. Their most notable MP4 player was the M6 Mini Player, which was also marketed by Dane-Elec outside China. In April 2007, Meizu officially released the Meizu M8, drawing long queues in front of Meizu stores. While we are now known Meizu as a smartphone maker, we got a flashback to Meizu company to 10 years ago when Meizu established in March 2003. On that day, Meizu is the manufacturer which produce MP3/MP4 multimedia player. Meizu walked along to the course of more than 10 years, their main product is MP3 portable music player which is M3 MusicCard, M6 MiniPlayer, M8 MiniOne, M9, MX and MX2 (smartphone).

Also Check Meizu V8 Pro (2018) Key Specification

Add a Comment

Your email address will not be published. Required fields are marked *

Tech HUB