LG Stylo 5 (2019) Official Firmware Download

Flashing Tools
USB Drivers

LG Stylo 5 (2019) Official Firmware Download

This post includes the official flash file for LG Stylo 5 (2019) which you can download it for free {LG Stylo 5 (2019) Official Firmware Download}. The installation guide is also included Please do follow the instruction of installation for the best result. Make sure you do not use this firmware for any other device, the possible consequence can be bad for that. Also make sure you take a backup of your phone before installing the firmware for a safe side. Thanks for Visiting TechnicalinfoHUB.

Installation Guidance (How To Install)

Step 1: Download and install the Android USB Driver on your computer. In case Android USB Drivers are already installed on your Computer then skip this step.

Step 2: Power Off your Android Smartphone and remove the Battery (if it is removable).

Step 3: Download the Stock Rom or Custom Rom that you want to Flash on your Android Smartphone and extract it on your Computer.

Step 4: Download and Extract Smart Phone Flash Tool on Your Computer. After Extracting you will be able to see Some Files

Step 5: Now Open Flash_tool.exe.

Step 6: Once the Smart Phone Flash Tool is launched, Click on the Download Tab.

Step 7: In the Download Tab, now click on the scatter-loading button.

Step 8: Now, Locate the Scatter File (you will find the scatter file in the Stock ROM folder).

Step 9: Now, Click on the Download Button to begin the Flashing Process.

Step 10: Now, Connect your Smartphone to the Computer using USB Cable (without battery- if it is removable). After connecting the device to the computer Press Volume Down or Volume Up key, so that your computer easily detects your smartphone.

Step 11: Once Flashing is completed, a Green Ring will appear.

Step 12: Close the Smart Phone Flash Tool on your computer and disconnect your Android Smartphone from the computer.

Note: All the files you download from the site and use it at your own risk and are fully responsible for it.

LG Stylo 5 (2019) Official Firmware Download

Link For The Flash File: Click Here To Download
File Size:
Model: Q720MS

LG Stylo 5 (2019) Official Firmware Download

LG Stylo 5 (2019) Official Firmware Download
LG Stylo 5 (2019) Official Firmware Download

About LG Stylo 5

LG Stylo 5 is powered by a 1.8GHz octa-core processor. The LG Stylo 5 runs Android 9.0 Pie and is powered by a 3,500mAh non-removable battery. As far as the cameras are concerned, the LG Stylo 5 on the rear packs 13-megapixel camera. The rear camera setup has autofocus. It sports a 5-megapixel camera on the front for selfies. LG Stylo 5 based on Android 9.0 Pie. Connectivity options on the LG Stylo 5 include Wi-Fi, Bluetooth v4.20, USB Type-C, and Headphones. Sensors on the phone include ambient light sensor, proximity sensor, and fingerprint sensor. The LG Stylo 5 measures 160.02 x 77.70 x 8.38mm (height x width x thickness) . It was launched in Blonde Rose and Platinum Gray colours.

About LG

LG Electronics was established in 1958 and has since led the way into the advanced digital era thanks to the technological expertise acquired by manufacturing many home appliances such as radios and TVs. The LG GW620, also known as the LG Eve and the LG InTouch Max, is a Smartphone manufactured by LG Electronics. It is the first smartphone from LG that runs the Android operating system.

Also Check LG Stylo 5 (2019) Key Specification

Add a Comment

Your email address will not be published. Required fields are marked *