Lenovo Lemon 3 K32C36 Official Stock Firmware

Flashing Tools
USB Drivers

Lenovo Lemon 3 K32C36 Official Stock Firmware

This post includes the official flash file for Lenovo Lemon 3 K32C36 which you can download it for free {Lenovo Lemon 3 K32C36 Official Stock Flash File Update}. The installation guide for flashing is also included Please do follow the instruction of installation for the best result. At first you have to install and setup the flashing tool and USB Driver that is already provided for you, then you can safely flash your android Smartphone. Make sure you do not use this firmware for any other device, the possible consequence can be bad for that. Also make sure you take a backup of your phone before installing the firmware for a safe side. Thanks for Visiting TechnicalinfoHUB.

Installation Guidance (How To Install)

Step 1: Turn off your Smartphone and try to remove the battery if it is removable.

Step 2: Download the USB Driver from the link given at the beginning of the post and install it on your laptop, make sure you download the correct USB Driver for your android device. If you already have the USB Driver installed in your laptop, skip this step.

Step 3: Download the Stock Rom or Custom Rom that you want to Flash on to your Smart Phone. Make sure to extract the Stock Rom on to your laptop.

Step 4: Also download and extract the Flash Tool on to your laptop. Make sure you download the correct flash tool corresponding to your android device. After extracting you will see some files.

Step 5: Now you have to open the file named “Flash_tool”.

Step 6: Once the flash tool is launched click on the “Download” button, you can locate it in at the top of the flashing tool.

Step 7: In the Download tab, now click on the scatter-loading button, located on the right side of the download tab.

Step 8: After clicking on the Scatter-loading button, you have to locate and select the scatter files. You can find the files in the Stock Rom folder that you have downloaded.

Step 9: Now you can click on the Download button to start the flashing process for your android device.

Step 10: Now, Connect your Smartphone to your laptop using a USB Cable (Try removing the battery, if it is removable). Then you have to press the volume up and down button of your Smartphone so that your laptop easily detect the Smartphone.

Step 11: A green light will appear indicating that the flashing process is completed.

Step 12: Now you can close the flash tool and disconnect your Smartphone from the laptop and restart your Smartphone.

  • Make sure your Smartphone has at least 40-50 percent battery charge in order to perform the flashing process successfully.

Note: All the files you download from the site and use it at your own risk and are fully responsible for it.

Lenovo Lemon 3 K32C36 Official Stock Firmware

Link For The Flash File: Click Here To Download
File Size: 788 MB
Model: K32C36

Lenovo Lemon 3 K32C36 Official Stock Firmware

Lenovo Lemon 3 (2016) | Key Specification
Lenovo Lemon 3 (2016) | Key Specification

About Lenovo Lemon 3

Lenovo Lemon 3 is powered by a 1.5GHz octa-core Qualcomm Snapdragon 616 processor. It comes with 2GB of RAM. The Lenovo Lemon 3 runs Android 5.1 and is powered by a 2,750mAh non-removable battery. As far as the cameras are concerned, the Lenovo Lemon 3 on the rear packs 13-megapixel camera. It sports a 5-megapixel camera on the front for selfies.

About Lenovo

Lenovo multinational technology company with headquarters in Beijing, China. Lenovo was founded in Beijing in November 1984. It entered the smartphone market in the year 2012 with Android Operating System. Lenovo is a US$47 billion personal technology company with more than 57,000 employees. Lenovo becomes the top PC maker in the world in 2013.

Also Check Lenovo Lemon 3 Key Specification

Add a Comment

Your email address will not be published. Required fields are marked *

Tech HUB