Huawei P Smart Z STK-LX1 Firmware Download

Flashing Tools
USB Drivers

Huawei P Smart Z STK-LX1 Firmware Download

This post includes the official flash file for Huawei P Smart Z (2019) which you can download it for free {Huawei P Smart Z STK-LX1 Firmware Download}. The installation guide is also included Please do follow the instruction of installation for the best result. Make sure you do not use this firmware for any other device, the possible consequence can be bad for that. Also make sure you take a backup of your phone before installing the firmware for a safe side. Thanks for Visiting TechnicalinfoHUB.

Installation Guidance (How To Install)

Step 1: Download and install the Android USB Driver on your computer. In case Android USB Drivers are already installed on your Computer then skip this step.

Step 2: Power Off your Android Smartphone and remove the Battery (if it is removable).

Step 3: Download the Stock Rom or Custom Rom that you want to Flash on your Android Smartphone and extract it on your Computer.

Step 4: Download and Extract Smart Phone Flash Tool on Your Computer. After Extracting you will be able to see Some Files

Step 5: Now Open Flash_tool.exe.

Step 6: Once the Smart Phone Flash Tool is launched, Click on the Download Tab.

Step 7: In the Download Tab, now click on the scatter-loading button.

Step 8: Now, Locate the Scatter File (you will find the scatter file in the Stock ROM folder).

Step 9: Now, Click on the Download Button to begin the Flashing Process.

Step 10: Now, Connect your Smartphone to the Computer using USB Cable (without battery- if it is removable). After connecting the device to the computer Press Volume Down or Volume Up key, so that your computer easily detects your smartphone.

Step 11: Once Flashing is completed, a Green Ring will appear.

Step 12: Close the Smart Phone Flash Tool on your computer and disconnect your Android Smartphone from the computer.

Note: All the files you download from the site and use it at your own risk and are fully responsible for it.

Huawei P Smart Z STK-LX1 Firmware Download

Link For The Flash File: Click Here To Download
File Size: 2.9 GB
Model: STK-LX1

Huawei P Smart Z STK-LX1 Firmware Download

Huawei P Smart Z STK-LX1 Firmware Download
Huawei P Smart Z STK-LX1 Firmware Download

About Huawei P Smart Z

The Huawei P Smart Z runs Android Pie and is powered by a 4,000mAh battery. As far as the cameras are concerned, the Huawei P Smart Z on the rear packs a 16-megapixel primary camera with an f/1.8 aperture and a second 2-megapixel camera with an f/2.4 aperture. It sports a 16-megapixel camera on the front for selfies, with an f/2.0 aperture. The Huawei P Smart Z runs EMUI 9.0 based on Android Pie and packs 64GB of inbuilt storage that can be expanded via microSD card (up to 512GB). The Huawei P Smart Z is a dual-SIM smartphone that accepts Nano-SIM and Nano-SIM cards. Connectivity options on the Huawei P Smart Z include Wi-Fi 802.11 a/b/g/n/ac, Bluetooth v4.20, NFC, USB Type-C, 3G, and 4G (with support for Band 40 used by some LTE networks in India) with active 4G on both SIM cards. Sensors on the phone include accelerometer, ambient light sensor, compass/ magnetometer, proximity sensor, and fingerprint sensor.

About Huawei

The Chinese telecommunications company has been manufacturing mobile phones since 1997. It is also the largest telecom infrastructure maker in the world. Huawei has more than 180,000 employees and operates in more than 170 countries and regions. Huawei overtook Ericsson in 2012 as the largest telecommunications equipment manufacturer in the world and overtook Apple in 2018 as the second-largest manufacturer of Smartphone in the world, behind Samsung Electronics.

Also Check Huawei P Smart Z (2019) Key Specification

Add a Comment

Your email address will not be published. Required fields are marked *