Honor Magic 2 3D (2019) Firmware Download

Flashing Tools            Wallpapers
USB Drivers

Honor Magic 2 3D (2019) Firmware Download

This post includes the official flash file for Honor Magic 2 3D (2019) which you can download it for free {Honor Magic 2 3D (2019) Firmware Download}. The installation guide is also included Please do follow the instruction of installation for the best result. Make sure you do not use this firmware for any other device, the possible consequence can be bad for that. Also make sure you take a backup of your phone before installing the firmware for a safe side. Thanks for Visiting TechnicalinfoHUB.

Installation Guidance (How To Install)

Step 1: Download and install the Android USB Driver on your computer. In case Android USB Drivers are already installed on your Computer then skip this step.

Step 2: Power Off your Android Smartphone and remove the Battery (if it is removable).

Step 3: Download the Stock Rom or Custom Rom that you want to Flash on your Android Smartphone and extract it on your Computer.

Step 4: Download and Extract Smart Phone Flash Tool on Your Computer. After Extracting you will be able to see Some Files

Step 5: Now Open Flash_tool.exe.

Step 6: Once the Smart Phone Flash Tool is launched, Click on the Download Tab.

Step 7: In the Download Tab, now click on the scatter-loading button.

Step 8: Now, Locate the Scatter File (you will find the scatter file in the Stock ROM folder).

Step 9: Now, Click on the Download Button to begin the Flashing Process.

Step 10: Now, Connect your Smartphone to the Computer using USB Cable (without battery- if it is removable). After connecting the device to the computer Press Volume Down or Volume Up key, so that your computer easily detects your smartphone.

Step 11: Once Flashing is completed, a Green Ring will appear.

Step 12: Close the Smart Phone Flash Tool on your computer and disconnect your Android Smartphone from the computer.

Note: All the files you download from the site and use it at your own risk and are fully responsible for it.

Honor Magic 2 3D (2019) Firmware Download

Link For The Flash File:Coming Soon
File Size:  
Model:  

Honor Magic 2 3D (2019) Firmware Download

Honor Magic 2 3D (2019) Firmware Download
Honor Magic 2 3D (2019) Firmware Download

About Honor Magic 2 3D

Honor Magic 2 3D is powered by a 2.6GHz octa-core HiSilicon Kirin 980 processor that features 2 cores clocked at 2.6GHz, 2 cores clocked at 1.92GHz and 4 cores clocked at 1.8GHz. It comes with 8GB of RAM. The Honor Magic 2 3D runs Android 9.0 and is powered by a 3,500mAh non-removable battery. The Honor Magic 2 3D supports proprietary fast charging. As far as the cameras are concerned, the Honor Magic 2 3D on the rear packs a 16-megapixel primary camera with an f/1.8 aperture; a second 24-megapixel camera with an f/1.8 aperture and a third 16-megapixel camera with an f/2.2 aperture. It sports a 16-megapixel camera on the front for selfies, with an f/2.0 aperture.

About Honor

Honor, a sub-brand under the Huawei Group was established in 2013. The company began its international expansion in 2014. In the past 5 years, the brand has seen explosive growth, with unrivaled results in China and around the world, becoming the No. 1 E-brand smartphone in China.

Also Check Honor Magic 2 3D (2019) Key Specification

Leave a Reply

Your email address will not be published. Required fields are marked *