Honor 10 (2018) CLT-L09C Firmware Download

Flashing Tools
USB Drivers

Honor 10 (2018) CLT-L09C Firmware Download

This post includes the official flash file for Honor 10 (2018) which you can download it for free {Honor 10 (2018)-CLT-L09C Firmware Download}. The installation guide is also included Please do follow the instruction of installation for the best result. Make sure you do not use this firmware for any other device, the possible consequence can be bad for that. Also make sure you take a backup of your phone before installing the firmware for a safe side. Thanks for Visiting TechnicalinfoHUB.

Installation Guidance (How To Install)

Step 1: Download and install the Android USB Driver on your computer. In case Android USB Drivers are already installed on your Computer then skip this step.

Step 2: Power Off your Android Smartphone and remove the Battery (if it is removable).

Step 3: Download the Stock Rom or Custom Rom that you want to Flash on your Android Smartphone and extract it on your Computer.

Step 4: Download and Extract Smart Phone Flash Tool on Your Computer. After Extracting you will be able to see Some Files

Step 5: Now Open Flash_tool.exe.

Step 6: Once the Smart Phone Flash Tool is launched, Click on the Download Tab.

Step 7: In the Download Tab, now click on the scatter-loading button.

Step 8: Now, Locate the Scatter File (you will find the scatter file in the Stock ROM folder).

Step 9: Now, Click on the Download Button to begin the Flashing Process.

Step 10: Now, Connect your Smartphone to the Computer using USB Cable (without battery- if it is removable). After connecting the device to the computer Press Volume Down or Volume Up key, so that your computer easily detects your smartphone.

Step 11: Once Flashing is completed, a Green Ring will appear.

Step 12: Close the Smart Phone Flash Tool on your computer and disconnect your Android Smartphone from the computer.

Note: All the files you download from the site and use it at your own risk and are fully responsible for it.

Honor 10 (2018)-CLT-L09C Firmware Download

Link For The Flash File: Click Here To Download
File Size: 2.9 GB
Model: CLT-L09C

Honor 10 (2018) CLT-L09C Firmware Download

Honor 10 (2018) CLT-L09C Firmware Download
Honor 10 (2018) CLT-L09C Firmware Download

About Honor 10

Honor 10 is powered by octa-core Hisilicon Kirin 970 processor. It comes with 8 GB of RAM. The Honor 10 runs Android 8.1 (Oreo) and is powered by a 3,400mAh battery. As far as the cameras are concerned, the Honor 10 on the rear packs 16 and 24-megapixel dual camera. It sports a 24-megapixel camera on the front for selfies.

About Honor

Honor, a sub-brand under the Huawei Group was established in 2013. The company began its international expansion in 2014. In the past 5 years, the brand has seen explosive growth, with unrivaled results in China and around the world, becoming the No. 1 E-brand smartphone in China.

Also Check Honor 10 (2018) Key Specification

Add a Comment

Your email address will not be published. Required fields are marked *

Tech HUB