Galaxy S10 (2019) Official Firmware Download

Flashing Tools
USB Drivers

Galaxy S10 (2019) Official Firmware Download

This post includes the official flash file for Samsung Galaxy S10 (2019) which you can download it for free {Galaxy S10 (2019) Official Firmware Download}. The installation guide is also included Please do follow the instruction of installation for the best result. Make sure you do not use this firmware for any other device, the possible consequence can be bad for that. Also make sure you take a backup of your phone before installing the firmware for a safe side. Thanks for Visiting TechnicalinfoHUB.

Installation Guidance (How To Install)

Step 1: Download and install the Android USB Driver on your computer. In case Android USB Drivers are already installed on your Computer then skip this step.

Step 2: Power Off your Android Smartphone and remove the Battery (if it is removable).

Step 3: Download the Stock Rom or Custom Rom that you want to Flash on your Android Smartphone and extract it on your Computer.

Step 4: Download and Extract Smart Phone Flash Tool on Your Computer. After Extracting you will be able to see Some Files

Step 5: Now Open Flash_tool.exe.

Step 6: Once the Smart Phone Flash Tool is launched, Click on the Download Tab.

Step 7: In the Download Tab, now click on the scatter-loading button.

Step 8: Now, Locate the Scatter File (you will find the scatter file in the Stock ROM folder).

Step 9: Now, Click on the Download Button to begin the Flashing Process.

Step 10: Now, Connect your Smartphone to the Computer using USB Cable (without battery- if it is removable). After connecting the device to the computer Press Volume Down or Volume Up key, so that your computer easily detects your smartphone.

Step 11: Once Flashing is completed, a Green Ring will appear.

Step 12: Close the Smart Phone Flash Tool on your computer and disconnect your Android Smartphone from the computer.

Note: All the files you download from the site and use it at your own risk and are fully responsible for it.

Galaxy S10 (2019)-SM-G970N Official Firmware Download

Link For The Flash File: Click Here To Download
File Size: 4 GB
Model: SM-G970N

Galaxy S10 (2019)-SM-G970U Official Firmware Download

Link For The Flash File: Click Here To Download
File Size: 3.4 GB
Model: SM-G70U

Galaxy S10 (2019) Official Firmware Download

Galaxy S10 (2019) Official Firmware Download
Galaxy S10 (2019) Official Firmware Download

About Samsung Galaxy S10

The Samsung Galaxy S10 is powered by 1.9GHz octa-core processor and it comes with 8GB of RAM. The phone packs 128GB of internal storage that can be expanded up to 512GB via a microSD card. As far as the cameras are concerned, the Samsung Galaxy S10 packs a 12-megapixel (f/1.5) primary camera and a 12-megapixel (f/2.4) secondary camera on the rear and a 10-megapixel front shooter for selfies.

About Samsung

Samsung was founded by Lee Byung-Chul in 1938 as a trading company. Over the next three decades, the group diversified into areas including food processing, textiles, insurance, securities, and retail. Samsung entered the electronics industry in the late 1960s and the construction and shipbuilding industries in the mid-1970s; these areas would drive its subsequent growth.Samsung was founded as a grocery trading store on March 1, 1938, by Lee Byung-Chull. He started his business in Taegu, Korea, trading noodles and other goods produced in and around the city and exporting them to China and its provinces. After the Korean War, Lee expanded his business into textiles and opened the largest woolen mill in Korea.

Also Check Samsung Galaxy S10 (2019) Key Specification

Add a Comment

Your email address will not be published. Required fields are marked *